Manual Tube Benders

0 Results

Unfortunately, your search did not provide any results.

Please check your search term and adjust it if necessary. You may already find the information you are looking for under the Product Categories or Further Contents tabs just above this note.

Perhaps you are looking for the following information?
▪ Information about the STAUFF Product Range
▪ STAUFF Product Catalogues
▪ CAD Files for STAUFF Products
▪ Latest News from STAUFF
▪ Global STAUFF Locations
▪ Online Contact Form

Alternatively, you can also reach us via Live Chat.

Tube Bending Devices from STAUFF: Simple and Precise Tube Bending

If tubes and tube made of steel and stainless steel need to be bent, STAUFF bending bending devices are the first and best choice. They are easy to operate and allow for a high level of accuracy. On this page, you will find all the essential information about the different versions of tube benders and their use.

Two Variants: Tube Benders for Metric and Imperial Tubes

With the variant TUB-MA-M622-LV-KIT, metric tubes made of steel and stainless steel with a diameter range of 6 to 22 mm can be processed. The variant TUB-MA-I414OD-LV-KIT allows the bending of imperial tubes with a diameter range of 1/4 to 7/8 inches. Depending on the diameter, the minimum wall thickness of the tubes to be bent is either 1.5 mm or 2 mm.

Manual Tube Bender for Metric Tubes

Hand tube bender in high-quality steel case for metric tubes up to 22 mm made of steel and stainless...

Learn more

Manual Tube Bender for Imperial Tubes

Hand tube bender in high-quality steel case for metric tubes up to 7/8 inches made of steel and stai...

Learn more

Tube Bending Devices from STAUFF in a Robust Steel Case

STAUFF manual tube benders are delivered as a complete set in a high-quality and extremely robust steel case. The delivery includes the STAUFF manual tube benders and the corresponding bending rollers. There are 8 bending rollers for metric tubes and 6 forimperial tubes. A multilingual operating manual is also included.

The manual tube benders from STAUFF weigh less than 15 kg in the case. If a vise is available, they can be used both in the workshop and on the go.

PDF

Instruction Manual TUB-MA

0,20 mb

PDF

Instruction Manual TUB-MA

0,20 mb

Datasheet for Manual Tube Benders from STAUFF

STAUFF Online Page-Flip Catalogue

Navigate and search content, forward via email, print, and download in PDF format

Open STAUFF Online Page-Flip Catalogue in New Tab

PDF

Catalogue STAUFF Clamps

38,00 mb

PDF

Catalogue STAUFF Clamps

38,00 mb

Frequently Asked Questions about Tube Bending Devices from STAUFF

What exactly is included in the delivery of the tube bending devices?

The delivery includes the tube bending device and 8 bending rollers for the metric variant and 6 bending rollers for the imperial variant. All components are delivered in a high-quality painted steel case and with a multilingual operating manual.

Where can I get spare parts for tube benders?

Spare parts for the manual tube bender and bending rollers can be reordered at any time in the STAUFF online shop. You can also find other accessories in the corresponding category.

For which types of tubes were tube bending devices designed?

The tube bending devices from STAUFF were designed for bending steel and stainless steel tubes for hydraulics.

The hydraulics industry is considered challenging because particularly high pressures are involved, and the tubes must not be damaged during bending.

Additionally, STAUFF tube bending devices are also used for bending measurement and control lines, coolant lines, exhaust systems, balustrades, handrails and railings, as well as constructions and displays for sales areas, playground equipment, and high-load brackets and supports.

For which tube materials were manual tube benders designed?

STAUFF tube bending devices were designed for bending tubes made of steel and stainless steel.

Tubes made of aluminum, copper, or brass are softer. They tend to buckle or break when bent. For these special tube materials, the specialized trade offers suitable devices.

Of course, rod material can also be bent with STAUFF tube benders. It works, even though the devices were not originally intended for this. Please ensure that the bending rollers are not overly stressed or damaged when bending rod material.

Can oval, rectangular, or square tubes also be bent with the tube bending devices?

STAUFF tube bending devices are only suitable for round tubes or pipes.

They cannot be used to bend oval, rectangular, or square tubes or pipes.

Why should a tube bender be used when bending tubes?

A tube bender from STAUFF ensures that the tube does not buckle when bent, thus remaining undamaged.

What is particularly important to consider when bending tubes?

When bending tubes, it is important to ensure that the tube does not kink or become damaged.

Also, note that tubes tend to spring back slightly after bending. Therefore, feel free to overbend the desired bending angle by 1-2°.

The bending rollers of STAUFF tube bending devices have a lasered scale. This scale helps to find the correct bending angle.

What is the difference between a tube bending device and a tube bending machine?

A tube bending device is also called a manual tube bender or simply a tube bender. In conjunction with a standard vise, it allows tubes to be bent by hand. The device is suitable for small to medium quantities.

STAUFF tube bending devices cover diameter ranges between 6 and 22 mm or 1/4 and 7/8 inches, depending on the model.

If larger diameters or quantities are required, fully automated, fully electric, or hydraulic tube bending machines are usually used. They offer additional functions such as programmable control and higher production speed.

The terms are often mixed, so STAUFF tube bending devices can also be referred to as manual tube bending machines.

Your Benefits in the STAUFF Online Shop

Direct sourcing from the quality manufacturer

Development, manufacturing and logistics in Germany

Live chat

Get directly in touch with the STAUFF customer service and sales team

Purchase with a few clicks

Add items to the shopping cart, order, pay and you're done

Express delivery

Typically for orders placed until 14:00 o'clock CET (for defined destinations only)

Questions about Tube Bending Devices from STAUFF

Do you need further information on selecting the right product or have questions about the online purchase process? Then contact a real product specialist in sales at STAUFF now via live chat.

Start a live chat now with a sales representative from STAUFF

We have a STAUFF sales unit in your region.